¡¡ Home Contact Enquiry Service Download






Cordless Miner's Caplamps

IECEx Certified¡¡Petrochemical Helmet Lamps

Charging Banks

CB53E: For KH3E-Ex

CB35E: For KH3E-Ex

CB8E: For KH3E-Ex

CB53: For general models

CB35: For general models

CB8: For general models

Charging bank accessories

Lamp Accessories

Traditional Caplamp

Roobuck Caplamp Bracket

Hemet & Attachment

I.S. Helmet Beacons

I.S. LED Strap

LED Hi-Vis Safety Vest

LED Hi-Vis Lighting Vest

Cordless Sandblast Light

UG Mining Machine Headlight

ELV Tunnel Lighting System

LED Board Light

Steel Mesh Reinforced PE Pipe
A Charging Bank charges multiple lamps together. All our Cordless Caplamps and Helmet Lamps are compatible for all charging banks, except external models. Charging banks are compact, light weight, high capacity, low current and easy to use. The automatic over-load protection function in each charging unit will cut off the charging circuit when the lamp is fully charged and therefore you never need to intervene in the charging process once you start it. Each charging unit has an indicator for charging process. The lamp can be locked to the Charging Bank.

Different models are not just in different charging units, but also in different inputs to suit your power facilities. Choose the right charging bank based on your lamp number, power availability, safety requirement and cost..

Model features and Application

Model Lamp number Power input Power distribution Lamp modles
CB53E 53 110VAC 12VDC KH3E-Ex
CB35E 35 24VAC 12VDC KH3E-Ex
CB8E 8 110VAC or 12/24VDC 12VDC KH3E-Ex
CB53 53 110VAC 12VAC All other models
CB35 35 110VAC 12VAC All other models
CB8 8 110VAC or 12/24VDC 12VDC All other models
Charging Procedure
There are two Charging Indicators as follows:
LCI (Lamp Charging Indicator): LCI is in the lamp. It only indicates whether the charging power is connected or not. It is always in red.
CCI (Charger Charging Indicator): CCI is on the charging bank or on the charger. It indicates the charging stages in two colours, by detecting the charging current. Green - No or small charging current; Red - Large charging current.
     ¡ñ  Connect the power of the charging bank and turn on the power switch on the panel. The CCI of a charging unit
          without lamp should be ¡®on¡¯ in green;
     ¡ñ  Turn off the lamp;
     ¡ñ  Plug the charging cable into the charging socket of the lamp; (For an external charging electrode model, plug the
          lamp into a charging unit or charger;)
     ¡ñ  The LCI should turn on; Otherwise, check the connection;
     ¡ñ  The CCI should turn red, indicating the initial charging stage if the lamp battery level is low;
     ¡ñ  After a few hours, the CCI will turn the colour in red and green alternatively, indicating the late charging stage;
     ¡ñ  When the CCI stays in ¡®green¡¯, the charging process is completed and the lamp is fully charged.


Copyrights Roobuck Pty Ltd All Right Reserved